How to identify whether a driver is an experienced driver or a novice? The length of time of driving an excavator is not the main factor, but the operation method is the basis of judgment. A novice must not only continue to study hard to grow into an experienced driver, but also undergo different working conditions to exercise, and finally enter the industry of experienced drivers.
In different operations, experienced drivers generally believe that trenching is more difficult, but this is not the case. Brick experts have listed 6 relatively difficult construction operations for everyone, the most difficult of which is thousands of times more difficult than trenching. I believe that some experienced drivers must not accept it and want to challenge it. Don’t worry, read the following and you will definitely be convinced!
NO.6: Throwing Soil
Difficulty Index: ★
Throwing soil is considered the basic skill in excavator operation. The first thing the master taught when he was an apprentice should be this kind of operation. Throwing soil is not difficult, easy to learn, but it also requires more practice.
For the same soil throwing operation, the work efficiency of experienced drivers and novices is definitely different, so novices must not underestimate throwing soil. After laying a good foundation, they will be more handy.
NO.5: Loading
Difficulty index: ★★
The second type of loading is an advanced operation of throwing soil. Some experienced drivers may think that loading is not difficult. In fact, don't underestimate loading. Whether the loading is done well directly affects your income. In many cases, loading is calculated according to the number of cars. Others load 20 cars a day, but you only load 10 cars a day. This is the difference in operation methods.
In fact, loading operations require methods, such as the height of the platform and the location of the car. These are more critical. For novices, you should ask experienced drivers for advice. Their operation experience can really help you improve your work efficiency.
NO.4: Hoisting
Difficulty index: ★★★
The most important point of hoisting is safety. Not only do you have to be slow and careful, but the position of the excavator is also crucial. The rope for hoisting objects must be checked to make sure it can bear the weight of the object. The binding should be checked several times to ensure it is firm.
There is a trick when performing hoisting operations. The first step is to lift the object with a large throttle, and then use a small throttle to install and dock after it is stable, so that it will be much more stable. Important things to say again, safety first.
NO.3: Silt
Difficulty index: ★★★★
I believe that silt operation is the most hated by machine friends. First of all, there is a whole car of sludge, which is annoying to look at. You have to wash the car thoroughly, and there is also the danger of getting stuck in the operation. So it is not easy to earn this money.
Before we carry out silt operation, we must fully observe the site environment, where to start and where to finish the work. The process of entering the mud must be slow, and the depth must be tested with a bucket from time to time. Once the silt does not exceed the bucket, do not move forward, change direction or pad with steel plates or stones.
There is another situation that everyone needs to pay attention to. Some soils will not sink the machine at the beginning, but they can't climb out after digging. Everyone knows the result, so silt operation not only needs to observe the site well, but also not to move too hard, dig and put lightly.
NO.2: Trench digging
Difficulty index: ★★★★★
Many machine operators think that trench digging is not difficult, as long as they dig in a straight line. Trench digging looks simple, but it is not. First of all, trench digging is not just trench digging, but also slope repairing. Moreover, the excavator operation is limited by the position during trench digging, and can only repair the slope on the side. Therefore, the trench dug by the operator without two brushes is not the same at all, and whether it can be dug into a straight line is also a problem, otherwise rework is inevitable.
Although trench digging is not simple, there are actually methods. If we encounter soft soil, we can dig out the required depth first, and then repair the slopes on both sides. If the soil is hard, we can open the opening a little wider first, dig and repair while digging, which will be much easier.
NO.1: Finding a partner
Difficulty index: ★★★★★★
The above operations are already difficult for some operators, but the last one is the most difficult, that is, finding a partner.
Excavator operators work outside all year round. They face either a group of old men or an old lady who cooks on the construction site. It is harder than climbing to the sky to see a girl, not to mention finding their other half, so many young operators choose to change their careers and do other jobs. Even operators who have started a family have to face the situation of being separated from their wives and children for many years, and they rarely have time to reunite with their families in a year.
Therefore, it is not easy to be an excavator operator. Every day, you are always tired and worried. Only you know this feeling. So if you have excavator operators around you, please care for them, love them, and let them often feel that little bit of warmth.
keywords:
Buy a small excavator,
buy a second-hand small excavator,
buy excavator parts, s
ell excavator parts,
buy a small excavatorChoose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
