Safety tips for multi-function skid steer loader operation

Dec 25th,2024 210 Views

After the multi-function skid loader is operated, the boom should be lowered to the ground before leaving the machine; remove the key, lift the safety bar locking device control lever, unfasten the seat belt, use the handrail and pedal to leave the cab; try to park the machine on a level ground, and place pads in front and behind the tires to prevent the machine from sliding.

Multi-function skid loader

1. When the multi-function skid loader is shoveling materials, the speed should be reduced to below 4km/h. When working on uneven ground, when the bucket is fully loaded, slow down as much as possible to avoid losing control or even overturning.

2. During loading and transportation, the bucket of the multi-function skid loader should be lowered as much as possible to ensure that the driver has a wide field of vision and keep the machine stable.

3. The multi-function skid loader cannot be turned with the boom raised high, and the engine speed should be appropriately increased, otherwise it is easy to roll over.

4. During the shoveling operation, when the bucket cutting edge and bucket teeth encounter obstacles, the obstacles should be avoided, the bottom of the bucket should be kept level with the ground, and the speed should not be too fast.

5. When working on a slope, you must be very careful not to bring the skid steer close to the edge of the slope to prevent it from tipping over.

6. The working requirements of the multifunctional skid steer loader are that the weight side of the front and rear tires of the entire machine is higher than the light side, which helps to position the center of the climbing in the middle of the front and rear tires and improve the overall stability of the machine. Before filling the bucket with materials, if the front tires are under pressure, you should drive forward when going uphill and reverse when going downhill. When the bucket is empty, the rear tires are under pressure, and you should drive forward when going downhill and reverse when going uphill.

The multifunctional skid steer loader is small in size and easy to operate. However, the multifunctional skid steer loader also has strict operating regulations, and the operator must strictly abide by these operating rules and regulations when operating the loader. Next, introducing the safe operation knowledge of the multifunctional skid steer loader to users will help them work better.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

Pay attention to oil-water separator failure during small excavator construction

What are the hazards to the service life of electric forklift batteries?

Company News

Industry dynamics

Safety tips for multi-function skid steer loader operation

CONTACT US